Sticklocks | Linus Tech Tips
$14.99
Linus Tech Tips Store
Sticklocks are designed to reduce the horizontal force applied to your joysticks when traveling with a controller or console. They're small, convenient, and can be installed or removed in seconds. Sticklocks are sold in packs of 4. Check out our Sticklocks Installation Guide: https://lmg.gg/sticklocks COMPATIBILITYValve Steam DeckNintendo SwitchNintendo Switch Pro ControllerPlayStation DualSense ControllerXbox ControllerNintendo Gamecube Controller The C-stick on a Gamecube controller is not compatiblePlayStation DualShock 4 ControllerPlayStation DualShock 3 ControllerPlayStation 2 Controller PlayStation 2 controller install can be finicky - your mileage may varyAsus ROG Ally (2023)And more... Sticklocks are NOT compatible with controllers like the Xbox Elite Controller, which have hot-swappable sticks.
Screwdriver Black and Orange / Silver Shaft | Linus Tech Tips
$69.99
Linus Tech Tips Store
Our ratcheting multi-bit screwdriver features a knurled stainless steel shaft with a strong embedded magnet, internal storage for 12 "shorty" 20mm bits (or 6 full-sized bits), an in-house designed three-lobe handle for comfort and ergonomics, and a tastefully-embossed LTT logo on the end cap. The ratchet is based on Megapro's long-standing & reliable design, but has been significantly modified to suit our needs. We reversed the ratchet direction (right for clockwise, left for anti-clockwise), adjusted the spring for lighter back-force which allows you to ratchet-drive even very small screws, and optimized for smoothness and quiet function. It's rated for operation of up to 220 inch-pounds of force. Our bit storage is another collaboration with Megapro. We utilized their patented bit clip storage design, but adjusted the length of the clips & the size of the total cavity to allow for our smaller, more ergonomic handle. All external plastics are Triax 1120 - a Nylon and ABS polymer which is great for injection molding parts like ours - for its overall durability and chemical resistance. The only exception is the black "accent ring" on the all black versions, which are made from machined Delrin, and the orange "accent ring" on the black & orange version, which are made from injection molded ABS. Internal plastics in our ratchet are also made from Delrin for its self-lubricating properties, and our ratchet housing is made from Zinc. Our industrial-looking black phosphate-coated S2 steel bits are durable and rust resistant. Standard bit set included with the screwdriver: PH0, PH1, PH2, H2, H2.5, H4, SL2, SL4, SL6, SQ1, SQ2, and our 5x5 Magnet bit (affectionately named "The Screw Retriever") (This was previously listed as a 6x6 magnet bit, but that was incorrect. The size is 5x5mm) NOTE: Bits are a consumable item and will wear or break down over time. Visual wear to the black phosphate coating is normal and expected. Other bit sets are available for purchase at https://www.lttstore.com/products/bits Using patents from Megapro Tools Inc.: 5,265,504 & 7,258,046 WARNING: Not compliant with airport security restrictions in some countries (including but not limited to US and Canada). Verify all security/travel restrictions before traveling with your screwdriver!
Screwdriver All Black / Silver Shaft | Linus Tech Tips
$69.99
Linus Tech Tips Store
Our ratcheting multi-bit screwdriver features a knurled stainless steel shaft with a strong embedded magnet, internal storage for 12 "shorty" 20mm bits (or 6 full-sized bits), an in-house designed three-lobe handle for comfort and ergonomics, and a tastefully-embossed LTT logo on the end cap. The ratchet is based on Megapro's long-standing & reliable design, but has been significantly modified to suit our needs. We reversed the ratchet direction (right for clockwise, left for anti-clockwise), adjusted the spring for lighter back-force which allows you to ratchet-drive even very small screws, and optimized for smoothness and quiet function. It's rated for operation of up to 220 inch-pounds of force. Our bit storage is another collaboration with Megapro. We utilized their patented bit clip storage design, but adjusted the length of the clips & the size of the total cavity to allow for our smaller, more ergonomic handle. All external plastics are Triax 1120 - a Nylon and ABS polymer which is great for injection molding parts like ours - for its overall durability and chemical resistance. The only exception is the black "accent ring" on the all black versions, which are made from machined Delrin, and the orange "accent ring" on the black & orange version, which are made from injection molded ABS. Internal plastics in our ratchet are also made from Delrin for its self-lubricating properties, and our ratchet housing is made from Zinc. Our industrial-looking black phosphate-coated S2 steel bits are durable and rust resistant. Standard bit set included with the screwdriver: PH0, PH1, PH2, H2, H2.5, H4, SL2, SL4, SL6, SQ1, SQ2, and our 5x5 Magnet bit (affectionately named "The Screw Retriever") (This was previously listed as a 6x6 magnet bit, but that was incorrect. The size is 5x5mm) NOTE: Bits are a consumable item and will wear or break down over time. Visual wear to the black phosphate coating is normal and expected. Other bit sets are available for purchase at https://www.lttstore.com/products/bits Using patents from Megapro Tools Inc.: 5,265,504 & 7,258,046 WARNING: Not compliant with airport security restrictions in some countries (including but not limited to US and Canada). Verify all security/travel restrictions before traveling with your screwdriver!
Backpack | Linus Tech Tips
$249.99
Linus Tech Tips Store
The definitive version of the LTT Backpack is now available! Featuring our updated Titanium Carabiner zipper pulls, as well as a bonded dual-layer bottom panel, this bag is purpose-built to keep your tech and accessories safe and secure. We thoughtfully designed the 22 pockets & sleeves for a wide variety of daily uses. This bag can accommodate multiple laptops or tablets, portable game consoles, accessories, and hardware/tools - including a pocket dedicated to the LTT Screwdriver, and a hidden Airtag sleeve near the water bottle sleeve in our vast main storage pocket (we've affectionately called this one the "bag of holding" internally).All straps & stitches have been reinforced well beyond what an average user would need, including our triple-rivet-reinforced top handle which can hold up to a pull force of 778.6N (175lb or 79kg).We've aimed for the best possible materials in all aspects. Our main material is a Repreve Polyester with a water-resistant lining which we tested to an AATCC water repellency rating of 80 (spills & light rain will bead on its surface), and - like other materials from Repreve - is made entirely from recycled plastic water bottles. Our zippers are, of course, from the legendary YKK - they're water-resistant across all external pockets & sport standard YKK zipper pulls on all zippered pockets. This bag's internal carrying capacity is 25.5L, and the external volume is 35L. That big difference is primarily due to the abundance of padding & reinforcement throughout the bag, including between pockets & below the laptop sleeve, ensuring that your devices should never slide directly onto a hard surface when inserted into a sleeve. Max laptop size for largest sleeve: 11.25 x 15.5 x 1.25" (28.575 x 39.37 x 3.175cm) Meets carry-on standards for most airlines (just barely fits under the seat!) For more info about the bag, check out the variety of photos down below! Note for backpack owners who purchased prior to October 27th, 2023: There is a known issue that may cause previously sold backpacks' zipper pulls to be more fragile than intended. For information, see here.
Tech Sack | Linus Tech Tips
$59.99
Linus Tech Tips Store
The perfect accessory for the LTT Backpack, and for travelers of all types. Utilizing the same water resistant fabric found on the LTT Backpack, our Tech Sack is meant to keep your small items organized in transit, whether those are cables, tools, toiletries, or cosmetics. It includes 8 internal sleeves for tech or other small items to keep things organized and separated, as well as water resistant YKK zippers to ensure a quality seal and feel. And for good measure, we included elastic loops for cables, pens, tools or any other items that you want to transport securely, as well as a hidden interior zipper pocket for items that can't be misplaced. The reinforced webbing handle provides an easy grip if stored in bags of any size, and provides an easy anchor point if you prefer to attach it to the outside of your bag with a carabiner. This is the ideal small bag for everyday carry, traveling, and general organization.
Stealth Desk Pad 900mm x 300mm | Linus Tech Tips
$29.99
Linus Tech Tips Store
The same great desk pad you know and love from LTT, with a totally stealth aesthetic. If you prefer a simple look with our great microtexture cloth surface & 3.5mm rubber base, this is the desk pad for you! Product photos for 1000x400, 1200x600, 1200x800, and 1200x900 coming soon!